CPI CLS Advance Скачать руководство пользователя страница 14

Страница: 14 / 62

OM_CLS_-_EN_2-0

Design & Function

CLS

Advance

Fig. 10:

Detail: Coin input funnel/dust tray and coin return tray

5.5

Status illumination

The upper illumination [

Fig. 9

] informs about the operating state of the CLS, the lower [

Fig. 9

]

indicates that the coin return conveyor is transporting coins to the return tray:

Illumination

Lighting/Flashing

Meaning

Top

for 2s

Initialization successfully completed

steady ON

Stand-by mode: ready for coin insertion

Processing coins

Warning! Solving problem. Do not insert coins

Attention! (Depending on configuration)
• Processing coins. Do not insert coins
• Problem solved and recorded. Ready for coin

insertion

Error! Transaction failed. Out of service

Warning! Coin return tray is full. Stop inserting
coins till return tray has been emptied

Bottom

Coin payout unit is transporting coins to the coin
return tray

To remedy the cause of a malfunction please refer to

Chap. "10.1 Quick troubleshooting using status illumina-

tion", p. 46

5.6

Coin input funnel

If the top illumination [

Fig. 9

] is green, one or more coins can be dropped into the coin input

funnel [

Fig. 10

]. Sensors in the funnel detect the coins and start the CLS centrifuge in the coin

acceptance unit. The top illumination is now flashing green.

Do not drop more than 50

€

1-sized coins at once in order that all coins can be

accepted properly and do not have to be rejected or cause a coin jam, which
in the worst case can damage the CLS.

To assure that no foreign objects reach the coin path the coin input funnel has holes allowing foreign
particles to fall in the dust tray [

Fig. 10

]. Other larger objects are separated from the coins in the

acceptance unit and directed to the coin return tray [

Fig. 10

Fig. 9:

Detail: Upper and lower status Illumination

Содержание CLS Advance































































Результаты поиска

Содержание CLS Advance

Отзывы:

Бренды по названию

Популярные бренды

CPI CLS Advance, Руководство оператора

Результаты поиска

Содержание CLS Advance

Отзывы:

Бренды по названию

Популярные бренды