manualshive.com logo in svg

CPI CLS Advance, Руководство оператора

Операторский мануал CPI CLS Advance доступен для бесплатного скачивания на {сайт}. Полное руководство пользователя позволит вам максимально эффективно использовать продукт. Скачайте мануал сейчас и ознакомьтесь с основными функциями и возможностями CPI CLS Advance.

Поделиться
Скачать
background image

OM_CLS_-_EN_2-0

7

CLS 

Advance

Safety instructions

4 

Safety instructions

Before starting up the device for the first time, please read this manual and in par

-

ticular the safety instructions carefully at least once. This is to ensure that you have 

understood the contents of this manual and how to operate the coin recycling system.

4.1 

Intended use

The CLS coin recycling system is intended for use in point of sale terminals and 

banks' front offices. It is designed to check different coins of one currency deposited 

into the coin input funnel for specific properties and to accept or reject them. Ac

-

cepted coins are sorted into coin hoppers and returned to the customer as change. 

Use the coin recycling system exclusively for this purpose. Under no circumstances 

can the manufacturer be held liable for any damage or loss resulting from improper 

use of the device.
The CLS has been built in accordance with state-of-the-art standards and the rec

-

ognized  safety  directives 

(cf. Chap. "9.1 Device data", p. 41)

.  Nevertheless,  this  equipment 

can constitute a source of danger. Please observe therefore the following safety 

instructions.

4.2 

Protecting persons and equipment

 

The coin recycler is designed for indoor use under dry conditions only.

 

Use the coin recycler only in accordance with its intended use. Under no circum-
stances can the manufacturer be held liable for any damage or loss resulting from 
improper use of the device.

 

Do only use an appropriate power supply unit and power cable providing protec-
tion against electromagnet interferences 

(cf. Chap. "9.4 Power supply requirements", p. 43)

. 

Connect the power cable only to a suitable grounded outlet.

 

Do not connect the equipment if the connecting cables show any damages or 
material fatigue (e.g. porous cables).

 

Do not throw or drop any foreign objects into the device.

 

Keep water and other liquids away from the coin recycler.

 

Switch the device off before cleaning the coin recycler or removing and reinstalling 
components. The CLS may only be cleaned and serviced/maintained by qualified 
technicians or CPI-trained and authorized personnel.

 

Contact Crane Payment Innovations in Buxtehude if you want to modify the device 
beyond the scope of the modifications or attachments described here.

 

When transporting the device always remove all coins and only use its original 

packaging. It is only in this way sufficiently protected.

 

Please dispose of the device correctly at the end of its service life.

 

We reserve the right to make technical modifications to the device which are not 
covered by this manual!

4.3 

Disconnection from supply

 

Disconnecting the CLS from supply (intended or unintended) may result in

• an immediate abortion of a currently running transaction
• remaining coins in the processing paths
• wrong coin counters

To not affect the coin counters please

1 

In any case, wait until a transaction has been finished.

2 

Switch off the device using the on-off switch on the rear side 

(cf. Chap. "7.1 Switching 

the CLS on/off", p. 25)

.

Compare 

Chap. "8.5 Eliminating coin jam-up", p. 38.

Содержание CLS Advance































































Отзывы:

Нет отзывов

Похожие инструкции для CLS Advance

CashConcepts CCE 2070 Short Manual preview
CCE 2070
Бренд: CashConcepts Страницы: 2
American Changer AC1178 Installation, Operation And Service Manual preview
AC1178
Бренд: American Changer Страницы: 23
BG7TBL FA-2 User Manual preview
FA-2
Бренд: BG7TBL Страницы: 17
Dover Triton FT5000 Site Preparation And Installation Manual preview
Triton FT5000
Бренд: Dover Страницы: 60
MA NC-6000 Service Manual preview
NC-6000
Бренд: MA Страницы: 84
Magnescale LT10A-105 Instruction Manual preview
LT10A-105
Бренд: Magnescale Страницы: 108
WATSON FC-130 Manual preview
FC-130
Бренд: WATSON Страницы: 2
Omega DPF78 SERIES User Manual preview
DPF78 SERIES
Бренд: Omega Страницы: 30

Бренды по названию

Популярные бренды

Загрузить еще бренды