Covidien Nellcor Series, Руководство оператора

Страница: 33 / 160

Nellcor™ Pulse Oximetry Sensor Connection
Operator’s Manual 3-5

Note:
Two types of battery are available: the standard 5-hour and optional 10-hour.

Note:
Even if the monitoring system is turned off, the Battery Charge Indicator remains lit while
the battery recharges.

Note:
A full charge of a depleted battery takes more than four (4) hours for a 5-hour battery or
eight (8) hours for a 10-hour battery.
Plug the monitoring system into an AC outlet to charge the battery for a minimum of three
(3) minutes prior to turning on any monitoring system with a completely discharged
battery. When operating on internal battery, the monitoring system battery status icon
indicates the battery charge condition.
To charge the internal battery:
1.
Connect the monitoring system to AC power to charge a low or depleted battery. Ref-
erence
AC Power Connection , p. 3-3.
2.
Verify the AC Power Indicator and Battery Charge Indicator light.
3.5
Nellcor™ Pulse Oximetry Sensor Connection

WARNING:
Incorrect application or use of an SpO
2
sensor can cause tissue damage. Do not wrap
the sensor too tightly, apply supplemental tape, or leave a sensor too long on one
place. Inspect the sensor site as directed in the
Directions for Use to ensure skin
integrity, correct positioning, and adhesion of the sensor.

WARNING:
Do not use any other cables to extend the length of the Covidien-approved interface
cable. Increasing the length will degrade signal quality and may lead to inaccurate
measurements.