Country Clipper CHALLENGER D510 Скачать руководство пользователя страница 89

Страница: 89 / 96

PARTS COVERED BY WARRANTY

Listed below are the parts (if equipped) covered by the Federal and California Emission Control Systems Warranty.

Some parts listed below may require scheduled maintenance and are warranted up to the first scheduled replacement

point for that part.

•

Oxygen sensor

•

Intake manifold

•

Exhaust manifold

•

Catalytic muffler

•

Thermal reactor muffler

•

Spark advance module

•

Crankcase breather

•

Air Injection System

-Air pump or pulse valve assembly

-Control/distribution valve

-Distribution manifold

-Air hoses

-Vacuum lines

•

Ignition module(s) with high tension lead

•

Gaseous fuel regulator

•

Electronic control unit

•

Carburetor or fuel injection system

•

Fuel metering valve

•

Air filter, fuel filter, and spark plugs (only to first scheduled replacement point)

•

Evaporative System

-Carbon canister and carbon canister mounting bracket

-Carbon canister filter

-Purge port/orifice connector

-Fuel tank

-Fuel cap and fuel cap gasket

-Primer bulb canister

-Fuel line (for liquid fuel and fuel vapors), fuel line fittings and clamps

-Carburetor purge port connector

Limitations

This Emission Control Systems Warranty shall not cover any of the following:
a. Consequential damages such as loss of time, inconvenience, loss of use of the engine or equipment, etc.

b. Diagnosis and inspection fees that do not result in eligible warranty service being performed.

Содержание CHALLENGER D510

































































































Результаты поиска

Содержание CHALLENGER D510

Отзывы:

Country Clipper CHALLENGER D510, Руководство по эксплуатации продукта, Страница: 89 / 96

Результаты поиска

Содержание CHALLENGER D510

Отзывы: