Country Clipper CHALLENGER D510 Скачать руководство пользователя страница 5

Страница: 5 / 96

1.1

Section 1… Basic Information

Thank you for purchasing a new Country Clipper mower. This manual will assist the operator in the proper

operation and maintenance of the mower. Following the information and instructions provided in the manual can

help you attain years of performance from your Country Clipper mower.
1.1

Country Clipper factory fills the engine with 10W-30 conventional engine oil (API Service Class SJ or

Higher). Consult engine owner’s manual for specific oil recommendations.

1.2

Typically 2 quarts of oil are required per engine oil change with filter. Consult engine owner’s manual for

specific oil recommendations and capacity.

1.3

Country Clipper uses 20W-50 conventional engine oil to fill the hydraulic transmission drive. (API Service

Class SJ or Higher)

1.4

Country Clipper recommends NLGI #2 grease for grease points.

Warranty Registration

The Warranty Registration must be completed within 30 days from date of purchase to validate the warranty. As

the new equipment owner, you are expected to confirm that the form is completed and documentation

forwarded to Country Clipper Mfg. at the time of delivery.

Warranty registration should be completed by the

selling dealership either by submitting through the online registration site or mailing the registration card to

Country Clipper.

The warranty is nontransferable.

Model/Serial Number

Your model & serial number can be located on the frame rail just above the grass discharge side of the deck.

These numbers will be needed when ordering service replacement parts.

Parts/Service

Genuine Country Clipper replacement parts must be used on your mower for warranty consideration.

Replacement parts are available through your authorized Country Clipper servicing dealer. Remember to provide

the following information from your mower when ordering service parts:

Correct Serial Number

Correct Model Number

Correct Part Number

Warranty repair and service must be performed through your authorized Country Clipper Dealer. Visit

www.countryclipper.com

to locate your nearest dealer.

Model & Serial Number Tag

Содержание CHALLENGER D510

































































































Результаты поиска

Содержание CHALLENGER D510

Отзывы:

Country Clipper CHALLENGER D510, Руководство по эксплуатации продукта, Страница: 5 / 96

Результаты поиска

Содержание CHALLENGER D510

Отзывы: