Country Clipper CHALLENGER D510 Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 96

Country Clipper CHALLENGER D510 Скачать руководство пользователя страница 83

Page 3 of 3

P-13486

REV A

Customer Responsibility



The owner is responsible for delivery of the mower to the Country Clipper approved servicing
dealer, within the Warranty period, and its return after Warranty work is completed.



The owner is responsible for maintaining and adjusting the equipment as outlined in the owner’s
manual.



Prompt notification to an Authorized Country Clipper Dealer or Country Clipper representative of
the need for warranty repair.



Having the warranty work performed by an authorized Country Clipper Dealer.



Contacting the desired Country Clipper servicing dealer to arrange the service through their
shop.

Contact the desired Country Clipper servicing dealer to arrange the service through their shop. Use our
dealer locator at

www.countryclipper.com

or U.S. and Canada customers can call 800-344-8237 to locate

their nearest dealer.

General Conditions

Country Clipper may change the design of its products from time to time. Nothing contained in this
Warranty shall be construed as obligating Country Clipper to incorporate said design changes into
previously manufactured products, nor shall said changes be construed as an admission that previous
designs were defective.

All implied Warranties, including those of merchantability and fitness for a particular purpose are, unless
specifically required by the law of the jurisdiction, hereby excluded.  Where implied Warranties are
required by law, including those of merchantability and fitness for a particular purpose, they are , where
allowed by the law of the State, limited to the above stated term of this Warranty.  Liability for
consequential damages, under any and all Warranties, both express and implied are hereby excluded
unless specifically required by the statutory law of the jurisdiction.  No claim of breach of Warranty shall
be cause for cancellation or rescission of the contract of sale of Country Clipper equipment.

This Warranty gives you specific legal rights, and you may also have other rights, which vary from regio n
to region.

To obtain the nearest servicing dealer:

Dealer locator:

www.countryclipper.com

Email:

[email protected]

Phone:

800-344-8237 or 641-872-2544

Mail: Country Clipper a Division of

Shivvers Manufacturing Inc.
613 West English St.
Corydon, IA 50060

«
...
81
82
83
84
85
...
»

Содержание CHALLENGER D510

































































































Отзывы:

Нет отзывов