
5.2
Maintenance Introduction
Regular maintenance is the best method to avoid costly downtime, expenses, and premature repair. Following the
service recommendations and intervals, on a routine basis, will help maintain your mower at its optimum
performance.
When operating, remain alert for unusual noises which could signal a problem. Visually inspect the mower for any
abnormal wear, leaks, or damage. The best time to detect potential issues is while performing scheduled
maintenance service.
Keep the mower clear of heavy build-up of grease, oil, and debris, especially in the engine compartment and
under the seat platform areas. Inspect daily for grass clippings, wire, and/or string tangles. The underside of the
mower deck will collect a build-up of grass clippings and dirt, especially when grass is wet or has high moisture
content. This build-up will harden, restricting blade and air movement and will probably show a poorer quality of
cutting. Routine removal of this build up is crucial for optimal mower performance. Some repairs will require
assistance from a trained service mechanic and should not be attempted by unskilled personnel. Contact your
Authorized Country Clipper Dealer when assistance is needed or to schedule maintenance at the dealership.
Engine Maintenance
5.1
Check Engine Oil
daily or after every 4 hours of use. Refer to the manufacture’s engine manual for the
maintenance schedule, oil recommendations, and capacity. IMPORTANT: Change engine oil and filter
within the first 5 hours of operation and thereafter per the engine manufacture’s recommendations.
5.1.1
Oil Drain…
Locate the engine oil drain on the right side of the engine.
5.1.2
Oil Container…
Position oil container under the drain spout.
5.1.3
Drain Valve…
Turn the drain valve counterclockwise until a steady flow of oil comes out of the
drain spout. Allow the oil to drain for 10 min. for adequate draining.
5.1.4
Oil Filter…
Remove the oil filter,
located near the oil drain.
Wear the appropriate Personal Protective Equipment (PPE) when servicing the mower. It is
required that the servicing personnel wear protective eyewear, hearing protection, hand
protection and foot protection.
Warning
DISCONNECT AND GROUND SPARK PLUG LEADS AND DISCONNECT NEGATIVE BATTERY
LEAD PRIOR TO CLEANING, INSPECTING, AND/OR SERVICING. ACCIDENTAL STARTS CAN
CAUSE SEVERE INJURY.
Danger
HIGH PRESSURE FLUIDS CAN PUNCTURE SKIN AND CAUSE SEVERE INJURY OR DEATH. DO
NOT WORK ON HIGH PRESURE FUEL SYSTEM WITHOUT PROPER TRAINING AND SAFETY
EQUIPMENT. FLUID PUNCTURE INJURIES CAN BE HIGHLY TOXIC AND HAZARDOUS. SEEK
MEDICAL CARE IF AN INJURY OCCURS.
Danger
HOT PARTS CAN CAUSE SEVERE BURNS. DO NOT TOUCH ENGINE WHILE OPERATING OR
JUST AFTER STOPPING. NEVER OPERATE WITH HEAT SHIELDS OR GUARDS REMOVED.
Danger
Electrical shock can cause injury. Do not touch wires while engine is running.
Warning
Содержание CHALLENGER D510
