Country Clipper CHALLENGER D510, Руководство по эксплуатации продукта, Страница: 17 / 96

4.4
4.3.15 Travel Reverse… Move the Twin Stick Drive Control Levers rearward to move in reverse.
Increasing the rearward travel of the Twin Stick Drive Control Levers will increase the
speed of travel.
4.3.16
Turn Left…
Move the Right Steering Drive Control Lever slightly ahead of the Left Steering
Drive Control Lever. Increasing the distance between the two Drive Control Levers will
increase the speed of travel to the left.
4.3.17 Turn Right… Move the Left Steering Drive Control Lever slightly ahead of the Right
Steering Drive Control Lever. Increasing the distance between the two Drive Control
Levers will increase the speed of travel to the right.
4.3.18 Zero Radius Turn… Move one Steering Drive Control Lever forward and one Steering
Drive Control Lever rearward. Left Zero Turn – Move Right Steering Drive Control Lever
forward and Left Steering Drive Control Lever rearward. Right Zero Turn - Move Left
Steering Drive Control Lever forward and Right Steering Drive Control Lever rearward.
4.3.19 Stop or Decrease Travel Speed… Move the Twin Stick Drive Control Levers in the opposite
direction of travel. To stop, move both Twin Stick Drive Control Levers to the neutral
position.
4.3.20 Stop and Park… With the Twin Stick Drive Control Levers in the neutral position, push the
Drive Levers outward to the Neutral Lock position.
Deck Cut Height Adjustment
4.4 The Deck Cut Height adjustment is adjustable in ¼ inch increments from 1 ½ to 5 inches to achieve your
desired cut height. The Transport Latch is a two position latch; in the Lock position the deck will lock in the
transport position when raised with the Cut Height Foot Pedal, in the Un-Lock position the deck will not
lock in the transport position when raised to the transport position by the Cut Height Foot Pedal.
4.4.1 Transport Latch in Lock Position… With the deck locked in the transport position insert the Cut
Height Pin to the desired height. Press the Cut Height Foot Pedal to lift the deck then lift the
Transport Latch straight up and slowly allow the deck to lower until the weight of the deck is
supported by the Cut Height Pin. Release the Transport Latch back to the Lock position. The next
time the deck is raised to the transport position it will lock in place.
4.4.2 Transport Latch in Un-Lock Position… In the un-lock position, the deck won’t latch in the
transport position. To change the cut height, press the Cut Height Foot Pedal to lift the deck.
While holding the deck up insert the Cut Height Pin to the desired height. Slowly allow the deck to
lower until the weight of the deck is supported by the Cut Height Pin.
Transport Latch
(Unlocked Position)
Cut Height Pin
Cut Height Pin
Transport Latch
(Locked Position)
In case of steering control loss during operation of the mower; place the Steering Control
Lever(s) in the neutral lock position, set the Park Brake, shut off the Blade Engagement
Switch, and shut off the Ignition Switch. Inspect the machine and contact your Country Clipper
dealer to resolve the issue before continuing operation.
Warning
Cut Height Foot Pedal
Cut Height Foot Pedal