Country Clipper CHALLENGER D510, Руководство по эксплуатации продукта, Страница: 29 / 96

5.6
5.5.3 Electrical Fuse… Country Clipper uses two 30 Amp Fuses
to protect the electrical system. The fuses are located
under the seat between the seat springs. The fuses
protect the electric system from a direct short to ground.
Deck Service
5.6 Your Country Clipper mower has been designed
with a Stand-Up Deck feature to allow you access to
the underside of your deck for cleaning and routine
maintenance. There are two different procedures to
stand up the deck depending on how your mower is
equipped; Manual Lift or Powered Lift. All 48”, 52”
& 60” deck models come standard with the Manual
Lift option. The Powered Lift option can be installed
on the 48”, 52” & 60” deck models as an optional
accessory.
Manual Deck Lift Procedure (Service Position)
5.6.1 Step 1. Position The Mower… Standing up the deck must be done on a hard level surface. When
positioning the mower on the hard surface, back up the mower so the Front Caster Tires swing
away from the deck. Turn the engine off, and remove the key.
5.6.2 Step 2. Transport Latch… Move Transport Latch forward to the lock position and push the Cut
Height Foot Pedal forward and lock the deck in the transport position.
5.6.3 Step 3. Lower Deck to Ground Surface… Remove the Cut Height Pin from the Cut Height Selector
plate. Push the Cut Height Foot Pedal Forward and move the Transport Latch to the unlock
position. Lower the deck so it is resting on the ground surface.
5.6.4 Step 4. Lock Deck in Lowest Position… Step off the mower platform. Push the Cut Height Foot
Pedal to the most rearward position and re-insert the Cut Height Pin in the Cut Height Selector
plate so the Foot Pedal is locked down. (Note: This takes a fair amount of effort; a ½ inch breaker
bar can be used in the Cut Height Foot Pedal to reduce the effort required.)
The Cut Height Foot Pedal is a Stored Energy Device when being locked down to stand up the
deck and during the unlock process. Use extreme caution when performing this procedure.
Keep bystanders clear of the area.
Warning
Transport Latch
(Unlocked Position)
Electrical System
Fuses