Country Clipper CHALLENGER D510 Скачать руководство пользователя страница 26

Страница: 26 / 96

5.3

5.1.5

Close Drain & Install Filter…

After the oil has drained, turn the drain valve clockwise to close the

valve. Install a new oil filter.

5.1.6

Clean Up…

Clean up any spills or drips and remove the used oil container.

5.1.7

Refill Engine Crankcase…

Refill per the manufacture’s recommendations.

5.1.8

Check Work…

Make sure that the oil drain valve is shut completely and the oil filter and dipstick

are secure.

5.1.9

Air Filter…

Check the engine air filter before each use. Examine for dirt and debris build-up on the

filter. Replace as required. Follow the engine manufacture’s recommendations.

5.1.10

Remove Air Filter…

Remove air cleaner cover and filter element from mower.

5.1.11

Install Filter…

Install a new filter and re-install the air cleaner cover. Check to make sure the air

cleaner cover sealed and is secure.

5.1.12

Check Air Cleaner Assembly…

Check all fittings and clamps periodically for tightness and inspect

hoses for holes or cracks. Make sure there is no path for dirt ingestion into the engine.

5.1.13

IMPORTANT…

Do not operate engine without the air filter in place. Do not clean the filter

element, replace with a new filter only. Improper cleaning of used air filter elements can get dust

on the inside of the filter causing dirt ingestion and engine failure.

5.1.14

Fuel Filter…

Refer to engine owner’s manual for schedule and procedure for replacing.

5.1.15

Spark Plugs…

Refer to engine owner’s manual for schedule and procedure for replacing.

5.1.16

Engine Cleaning…

Proper engine cooling is essential. To prevent overheating, clean screens,

cooling fins, and other external surfaces of engine. See engine owner’s manual for specific

requirements.

Engine Oil Drain

Engine Oil Filter

Oil Drain Valve

Содержание CHALLENGER D510

































































































Результаты поиска

Содержание CHALLENGER D510

Отзывы:

Country Clipper CHALLENGER D510, Руководство по эксплуатации продукта, Страница: 26 / 96

Результаты поиска

Содержание CHALLENGER D510

Отзывы: