CORVUS 70E V2, Инструкция по эксплуатации

Страница: 19 / 29

ARF® MODEL
3.3 Glue the CA hinge for the elevator the same way as the main wings
3.4 There is an option to use one servo or two servos for the elevator. If using one servo, the
twohalves of the elevator need to be connected by the included fiberglass bar with glue as
shown below. The picture is for illustration only. Actually, the connection of the 2 parts needs
to be performed before the hinges are connected.
3.5 Locate the slots for elevator servo(s), remove covering. Connect wire extension to your servos
before feeding the wire into fuselage. Install servo(s) with screws supplied by servo
manufacturer.