CORVUS 70E V2, Инструкция по эксплуатации

Страница: 23 / 29

ARF® MODEL
5.2 Tail wheel kit is pre-assembled in factory, for safety, please remove all screws and then re-
assemble with thread locker.
5.3 Drill 2 mm holes on the bottom rear of the fuselage, secure the tailwheel bracket with the
provided screws. For best results, the pivot point of the assembly should be over the hinge line
of the rudder.
5.4 Drill a hole on the bottom of rudder, 70-100mm away for the hinge line. Secure the tail wheel
spring with provided self-threading screw.
6. Motor Mounting
6.1 Find the hardware set for motor installation in the hardware package.