CORVUS 70E V2, Инструкция по эксплуатации

Страница: 16 / 29

ARF® MODEL
1.7 Use your radio to set the centers of each servo and then assemble and adjust the length of each
control rod. The servo arm should be as close to perpendicular to the control rod as possible
while the aileron is at neutral. Double check all screws, bolts and nuts to assure proper
installation and operation without binding.Once satisfied, permanently attach the ball links to
the servo arms and horns with the supplied screw and nut.
1.8 Check the final radio operation of the ailerons and make sure there is no binding or servo
fighting of each other. Also check to make sure all linkage bolts and nuts are secure.
1.9 Repeat this process for the other wing half.
2. Landing Gear Installation
2.1 Locate the landing gear set
2.2 Install the wheel axles to the landing gear and tighten the nylon-insert lock nut. Install one
wheel collar onto the axle. Use a second wheel collar as a guide to leave a gap on the inboard
of the axle. Use a small drop of thread-lock and tighten in place. Slide the wheel onto the axle
and install a second wheel collar also using thread-lock on the set screw.