CORVUS 70E V2, Инструкция по эксплуатации

Страница: 15 / 29

ARF® MODEL
1.5 The slots for CA hinges are pre-cut. Insert CA hinges half way into the hinge slots on aileron,
apply a drop of thin CA to secure the hinges. Then insert all hinges into slots on the wing at
once, align aileron with the wing, move the aileron up and down a few times to reach the
minimal hinge gap while still allowing full deflection of the aileron. When satisfied, apply
more think CA on both top and bottom sides of each hinges.
1.6 Cut the covering from the aileron servo slots from corner to corner and iron down inside the
openings. Connect servo wire extensions to your servos and secure the connections with the
supplied clips. Feed the servo wires into the wing and out the root. The screw holes for servo
mounting are laser pre-drilled, it is advisable to apply some thin CA to strengthen them, Install
the servos and screw firmly in place.