CORVUS 70E V2, Инструкция по эксплуатации

Страница: 27 / 29

ARF® MODEL
10.1 Before arriving at your flying field, be sure all your batteries are properly charged and all
radio systems are in proper working order.
10.2 Install the wings onto the fuselage being careful to align the wing tube with the wings and not
force it. The wing tube may be initially tight but will loosen some with use. Guide your servo
wires into the fuselage openings and connect to the proper aileron channels. Servo clips are
recommended. Once you have the wings fully seated in the fuselage tighten the wing bolts inside
the fuselage.
10.3 Side force generators Assembly, cut the wing film needed to be instal the SFG. Fixed the SFG
Use M3X12 Hexagon socket screw and washers.
10.4 If you have removed your horizontal stabilizers, install them once again and check all bolts
and connections.