File : CS-SUP-MUTI-WTHERMAPP-E01.sxw
3 PRESENTATION OF THE WAVETHERM MODULES FUNCTIONALITIES
3.1 SENSORS INTERFACE
➢
WaveTherm – DALLAS :
The module is designed to manage to the maximum two DALLAS temperature sensors (type
DS18B20).
This DALLAS sensor of 1-wire type integrates a 12-bit internal converter.
Each external sensor is connected to the module by a cable equipped with a BINDER connector of
3-pin type.
An automatic identification of the temperature sensors allows to memorize the identifier of the
sensors. This phase is automatically carried out when powering the module
and is also activated on a specific radio request (in this case, The module returns by radio the
identifiers of the sensors).
➢
WaveTherm – PT100 :
The WaveTherm-PT100 module has the possibility to manage 1 or 2 PT100 temperature sensors.
The probes are connected to the module through impervious connectors allowing to connect 2, 3 or 4
wires probes.
➢
WaveTherm – PT1000 :
The WaveTherm-PT1000 module has the possibility to manage 1 or 2 PT1000 temperature sensors.
The probes are connected to the module through impervious connectors allowing to connect 2, 3 or 4
wires probes.
WaveTherm modules – application handbook
page 7 of 65
