7
Installation Guide
Corinex HD200 CableLAN Wall Mount
•
Hane Win DHCP / TFTP server.
This is an easy to use DHCP & TFTP server.
It is very useful for configuring the modem at start-up. It can be downloaded
from:
http://home.foni.net/~hanewin
•
Iperf
is a network performance test tool. It is useful for testing the speed of a
network link. It can be downloaded from:
http://sourceforge.net/projects/iperf/
Note:
If you want to analyze the performance of your units, make sure that
there is no firewall or anti-virus software running on your system. If Service
Pack 2 is installed on XP, disable the DHCP server service and the firewall
service. All the tools and examples described in this document have been
tested on Windows XP SP2.
Similar tools are available for most Linux/Mac distributions.
2.4 Device Description
The adapter has 2 buttons and 3 LEDs to
indicate different states. The table on the next
page describes the functionality in detail. The
Ethernet port is located on the bottom of the
device, the F-type connector for CableLAN
communication on top of the device.
Button Description:
Control button (PTTP/FRST)
The button is used to configure the PTTP
mode and to perform factory reset of the
device.
- in order to change the PTTP mode,
press and hold the button for 3 seconds. The
status of PTTP will be changed and the AP
LED will display the status.
- in order to perform a
factory reset
, press
and hold the PTTP/FRST button for more
than 10 seconds. The device will then restart
and boot up with factory default settings.
PTTP/FRST
CONN
CableLAN port
Ethernet port
Note:
PTTP (Parametric Translation Table Protocol) is a proprietary protocol
enabling communication with management VLAN. It is described in detail in
the AV200 ALMA autoconfiguration manual located on the Documentation
CD (chapter PTTP protocol).
