Corinex HD200 CableLAN Wall Mount
15
Configuring the DHCP / TFTP Server
4
Configuring the DHCP / TFTP Server
The HaneWin DHCP / TFTP server works based on profiles. For every lease,
there is a profile assigned. For a basic network, only two profiles are needed:
a Master profile and a Slave profile. The parameters defined in a profile are as
follows:
• Netmask
• Gateway
• TFTP server IP
• Auto-configuration file name
• DHCP extensions
Note
: The HD200 CableLAN Wall Mount can only be used as a slave (CPE,
Customer Premises Equipment). Therefore another adapter from Corinex’s
portfolio needs to be installed in the network to act as a master (i.e. LV
Gateway).
Upon receipt of the DHCP reply, the modem will download the specified auto-
configuration file from the given IP address.
The first thing you need is a basic set of auto-configuration files. Please see Section
6 for examples. Then, create a new directory and add the two files to this directory.
For the next step, go to
Options > Preferences
where we will configure the
DHCP/TFTP server for our needs.
Figure 2: Interfaces tab settings
