Corinex HD200 CableLAN Wall Mount
24
Device specific parameters
7
Device specific parameters
This chapter describes autoconfiguration parameters and MIBs, that are specific for
the Corinex HD200 CableLAN Wall Mount. The general parameters can be found in
the remaining two documents: Alma auto-configuration and SNMP manual.
7.1 Enable/disable multicast aging
A new functionality was added in the firmware to enable/disable multicast aging. In
the auto-configuration file it can be added as a parameter:
MCAST_IGMP_AGING = [yes|no]
Default value is “yes”.
7.2 Enable/disable interface EXTA
It is possible to enable/disable the interface EXTA (Ethernet) by using either an auto-
configuration file or SNMP.
A new parameter can be added in the auto-configuration file in order to enable/
disable the interface EXTA:
DISABLE_EXTA = [yes|no]
Default value is “no”.
Alternatively the interface EXTA can be enabled or disabled using SNMP:
private(4)
enterprises(1)
ds2 (6798)
wisconsin (3)
corinexMAC (20)
plCorinexDisExtA(2)
plDisExtA (1)
(0) INTEGER rw enable/disable interface EXTA.
