8
Installation Guide
Corinex HD200 CableLAN Wall Mount
Reconnection (CONN)
After this button is pressed, the device will disconnect from it’s master (if applicable)
and start best master selection process.
LED Description:
AP LED
This LED indicates the state of the adapter: Factors to consider in the state of a
device are:
1. Status of the device (whether it’s powered ON or OFF)
2. Status of PTTP mode (enabled or disabled)
3. Status of connection handled by Port Solver
4. Status of CableLAN connection
5. Status of auto-configuration process.
If the AP LED is turned off, the device is powered off. If the LED is on, the device
is powered on. The color and behavior of the LED varies in order to show the
different states mentioned above. Following table summarizes the behavior:
LED status
Meaning
PTTP
mode
Port solver
handles the
connection
CableLAN
connection
established
Auto-
configuration
status
Green flashes
every 2 seconds
disabled in progress
N/A
N/A
Red/Green
alternating
disabled finished
in progress
N/A
Green flashes
every 0.5 seconds
disabled finished
finished
in progress
Green
disabled finished
finished
finished
Amber flashes
every 2 seconds
enabled
in progress
N/A
N/A
Red/Amber
alternating
enabled
finished
in progress
N/A
Amber flashes
every 0.5 seconds
enabled
finished
finished
in progress
Amber
enabled
finished
finished
finished
