18
Corinex HD200 CableLAN Wall Mount
Configuring the DHCP / TFTP Server
Figure 6 Other tab
Now repeat the same steps to create the Slave profile. The only difference is the
name of the auto-configuration file under extension 18 will be “Slave.conf” or
whatever the filename of your slave configuration file is.
Once you have the profiles, you can proceed to assign a profile to each of your
modems. This assignment is based on the adapter’s MAC address.
Note
: The HD200 CableLAN Wall Mount can be used only as a slave (CPE,
Customer Premises Equipment). Therefore another adapter from Corinex’s
portfolio needs to be installed in the network to act as a master (i.e. LV
Gateway).
In the main window of the HaneWin server, click the button labeled, “
New
” in the
lower button bar. A new window will open, as shown in figure 7.
In this window, you must enter the MAC address of the modem, the IP address that
you want assigned to this modem, and the configuration profile. When you click
OK
,
it will create an entry in the static leases list.
5. In the tab, “
Other
”, select option
18
and type in the name of the
Master configuration file (e.g. “Master.conf”). Change this value to String and
then click “Add”.
6. In the same tab, add option
120
with binary value “
0 0 0 0
”.
