13
Installation Guide
Corinex HD200 CableLAN Wall Mount
In order to make your network work, at least 2 adapters (a Head End and a slave
unit) are needed on a network. The current version of the CableLAN Wall Mount
adapter can work only as a slave unit and another device from Corinex’s portfolio
(e.g. Corinex Low Voltage Access Gateway, High Density Access Gateway, HD
Building Controller etc.) has to be used as a Head End or master unit. More detailed
information on how to connect and set up the master unit can be found in the
corresponding adapter’s documentation.
Warning:
Note to CATV System Installer in the U.S.A.
: Please read Section
820-93 of the National Electric Code which provides guidelines for proper
grounding. In particular, this document specifies that the Coaxial cable shield
must be connected to the grounding system of the building and as close to
the point of cable entry as possible.
