WIND-TWIST
operator’s manual
31
GB
TECHNICAL CHARACTERISTICS
-
Drive system ......................................... 1 protected motor for the roller and
................................................................ 1 protected motor for the hollow spindle
-
Power voltage ........................................ 220 volt 1 phase 50/60 Hz
-
Max absorption per machine .............. 900 W
-
Twisting speed ...................................... variable from 10 to 250 m/min
-
Winding speed ...................................... variable from 200 to 720 m/min
-
Standard crossover angles .................. 13° or 16°
- Crossover
angles
................................... 11°/14°-15°/18°
- Winding
stroke
...................................... 6”(152
mm)
-
Winding cone size ................................. max 290 mm
-
Hollow spindle cone size ..................... max 190 mm
- Hollow
spindle
cone
............................ 4.20°-5.57°
-
Winding .................................................. cones 9.15°-5.57°-4.20°-3.30°
................................................................ spindle centres or spindles
-
Slub catcher ........................................... mechanical system with micrometric
................................................................ control
-
Waxing .................................................... counter-rotating motion with
................................................................ square-holed
paraffi n wax ring
-
Overfeeder ............................................ 1 per machine
-
Threading ............................................... automatic threading of waxing assembly
- Confi guration ......................................... max 1 head per machine
- Dimensions:
-
length
........ 570
mm
-
depth
........ 1100
mm
-
height
........ 1420
mm
-
Weight of electric/electronic parts ...... 1,43 Kg
NORMAL OPERATING CONDITIONS
CAUTION!
Get to know your machine : your familiarity with its exact operation is the best guar-
antee of safety and performance.
Learn the set up of all controls and their functions.
Accurately check for correct functioning of every machine control device.
To prevent accidents and personal injury, all the equipment must be correctly in-
stalled, correctly operated and correctly serviced.
ATTENTION
Any use of the machine other than the described use is to be considered as improp-
er and unreasonable.
ATTENTION
It is advisable to use only CORGHI original tools for the work.
Fig. 5 shows correct operator position during loading and unloading of the cones.
Содержание WIND-TWIST
