www.cooperbussmann.com/wirelessresources
Cooper Bussmann 5073E-T Managed Ethernet Switch User Manual
69
Rev Version 1.1
Server Timeout
Set the number of seconds that the switch waits for a server response to an
authentication request.
Max Requests
Set the number of authentications that must time-out before authentication fails and
the authentication session ends.
Re-Auth period
Set the number of seconds after which connected clients must be re-authenticated.
Apply
Click to apply the settings.
802.1X/Radius Port Setting
You can configure the 802.1x authentication state for each port. To configure the port settings, choose
Security
-->
802.1x/Radius
-->
Port Settings
.
Figure 74 802.1X Radius - Port Setting
Port Authorization
Mode
You can choose from the following authorization states:
•
Reject
—The specified port is required to be held in the unauthorized state.
•
Accept
—The specified port is required to be held in the authorized state.
•
Authorize
—The specified port is set to the Authorized or Unauthorized state
in accordance with the outcome of an authentication exchange between the
supplicant and the authentication server.
•
Disable
—When disabled, the specified port works without complying with 802.1x
protocol.
Apply
Click to apply the settings.
802.1X/Radius Port Status
To display the authorization status of a port, choose
Security
-->
802.1x/Radius
-->
Port Status
(see Figure 75).
