www.cooperbussmann.com/wirelessresources
Cooper Bussmann 5073E-T Managed Ethernet Switch User Manual
49
Rev Version 1.1
Ingress Limit
Frame Type
Select the frame type to be filtered:
• All
• Broadcast/Multicast/Flooded Unicast
• Broadcast/Multicast
• Broadcast only
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast, and Broadcast only
types are only for ingress frames. The egress rate only supports the “All” type.
Ingress
Set the ingress rate limit, in kbps. (One Mbps is equal to 1024 kbps.) The rate range
is from 100 kbps to 102400 kbps (100 Mbps) for mega-ports, or 256000 kbps
(250 Mbps) for giga-ports. Zero indicates no ingress rate limit.
Apply
Click to apply the settings.
6.5.3 Aggregation
Aggregation Configuration
Port trunking is the combination of several ports or network cables to expand the connection speed beyond the
limits of any single port or network cable. Link Aggregation Control Protocol (LACP), is a protocol running on layer 2
that provides a standardized means (in accordance with IEEE 802.3ad) to bundle several physical ports together
to form a single logical channel. All the ports within the logical channel (logical aggregation) work at the same
connection speed. LACP operation requires full-duplex mode.
To configure port aggregation, choose
Configure
-->
Aggregation
-->
Configuration
.
Figure 51 Aggregation Configuration
Group ID
Select the trunk group to which the port is to be assigned (Trunk1, Trunk2, Trunk3,
Trunk4, or Trunk5), or select “None” if you do not want the port assigned to any trunk
group. The default Group ID is “None.”
