28
www.cooperbussmann.com/wirelessresources
Cooper Bussmann 5073E-T Managed Ethernet Switch User Manual
Rev Version 1.1
Figure 25 SNTP Page
SNTP Client
Enable or disable the SNTP function to get the time from the SNTP server. When
enabled, the SNTP client uses the service from the SNTP server and the system time
will follow the SNTP server. When disabled, local time is used without any SNTP
server information.
NOTE when SNTP is enabled, a network connection between the 5073E-T
switch and the SNTP server is required for the SNTP client within the switch
to receive and synchronize time information to the time provided by the
SNTP server.
UTC Timezone
Universal Time Coordinated. Sets the local time zone for the switch location. See
Table 1 for a list of time zones.
SNTP Sever Address
Sets the SNTP server IP address. You can enter the IP address of a local network
time server or an Internet time server.
Daylight Saving Time
Allows you to enable or disable the Daylight Saving Period and Daylight Saving
Offset settings. When enabled, the Daylight Savings settings are in effect, and when
disabled, these settings are ignored.
Daylight Saving
Period
Sets the daylight saving beginning date and time and ending date and time. Enter
the date in the format YYYYMMDD and the time in the format HH:MM (leave a space
between YYYYMMDD and HH:MM).
Daylight Saving
Offset
For non-US and European countries, specify the amount of time for day light
savings. You can specify between 0 and 12 hours.
Apply
Click to apply the settings.
Table 1
Local Time Zone
Conversion from UTC
Time at 12:00 UTC
November Time Zone
- 1 hour
11am
Oscar Time Zone
-2 hours
10 am
ADT - Atlantic Daylight
-3 hours
9 am
AST - Atlantic Standard
EDT - Eastern Daylight
-4 hours
8 am
