www.cooperbussmann.com/wirelessresources
Cooper Bussmann 5073E-T Managed Ethernet Switch User Manual
43
Rev Version 1.1
Figure 42 DHCP Server Configuration
DHCP Server
Enable or disable the DHCP server function on the switch. When enabled,
the switch will be the DHCP server on your local network.
Start IP Address
Enter the IP address that is the beginning of the dynamic IP address range.
For example, if the dynamic IP address is between 192.168.1.100 and
192.168.1.200, the start IP address would be 192.168.1.100.
End IP Address
Enter the IP address that is the end of the dynamic IP address range.
For example, if the dynamic IP address is between 192.168.1.100 and
192.168.1.200, the end IP address would be 192.168.1.200.
Subnet Mask
Enter the subnet mask of the IP configuration.
Gateway
Enter the IP address of the gateway in your network.
DNS
Enter the domain name server IP address in your network.
Lease Time (Hour)
Enter the number of hours after which the client will reset the dynamic IP
address.
Apply
Click to apply the settings.
DHCP Server Client Table
When the DHCP server function is enabled, the system will collect the DHCP client information including the
assigned IP address, the MAC address of the client device, the IP assigning type, status, and lease time.
To view the DHCP server client table, choose
System
-->
DHCP Server
-->
Client Table
.
Figure 43 Client Table
DHCP Server IP Binding
You can specify (bind) an IP address for each port. When the device connects to the port and requests an IP
address, the system will assign the IP address that is bound with the port.
To configure IP address binding, choose
System
-->
DHCP Server
-->
IP Binding
.
