26
www.cooperbussmann.com/wirelessresources
Cooper Bussmann 5073E-T Managed Ethernet Switch User Manual
Rev Version 1.1
Kernel Version
Kernel software version.
Device MAC
Unique hardware address assigned by the manufacturer.
System Time
Current time on switch.
Enable Location Alert
Click to cause the fault LED on the switch to flash.
Asset
The Asset page allows you to change switch settings, including the system name, description, location, and contact
information. Choose
System
-->
General
-->
Asset
to display this page.
Figure 23 Asset Page
System Name
Assign the system name of the switch (the maximum length is 64 bytes).
System Description
Switch description.
System Location
Physical location of the switch (the maximum length is 64 bytes).
System Contact
Name of contact person or organization.
System OID:
SNMP OID of switch.
Firmware Version
Displays the switch’s firmware version.
Kernel Version
Displays the kernel software version.
Device MAC
Displays the unique hardware address assigned by manufacturer.
Apply
Click to apply the settings.
CPU Load Average
To display the CPU load average for the switch, choose
System
-->
General
-->
CPU Load Average
. The load
is averaged over the previous 1-minute, 5-minute, and 15-minute intervals, as shown in Figure 24. The X-axis
indicates the minute intervals, and the Y-axis indicates the average CPU load. When the average CPU load reaches
90% the system logs an Event Alarm to the Syslog if the
Syslog
checkbox is selected under Event Alarm Setting at
the bottom of the page. To enable the Syslog, see “6.4.5 Syslog.”
