CONVEY-ALL 1635-FL, Руководство оператора

Страница: 35 / 60

08.2020 4-1
Operator’s Manual: 1600-FL Series Conveyor
Section 4: SERVICE AND MAINTENANCE
• Review the Operator’s Manual and all safety
items before maintaining the conveyor.
• Clear the area of bystanders, especially
children, before repairing or adjusting.
• Before servicing, repairing or unplugging;
place controls in neutral, stop engine,
remove ignition key and wait for moving
parts to stop.
• Follow good shop practices:
- Keep service area clean and dry.
- Be sure electrical outlets and tools are
properly grounded.
- Use adequate light for the job at hand.
• Relieve pressure from the hydraulic circuit
before servicing.
• Always cover PTO driveline yokes and shafts
with guards. Keep hands, body parts, hair
and clothing away from moving parts.
• Keep hands, feet, hair and clothing away
from all moving and/or rotating parts.
• Make sure there is plenty of ventilation. Never
operate the engine in a closed building. The
exhaust fumes may cause asphyxiation.
• Place stands or blocks under frame before
working beneath the unit.
• When maintenance is complete, before
resuming work, install and secure all guards.
• Keep decals clean, replace if not readable.
By following the operating instructions, in conjunction with a good maintenance program, your conveyor
will provide many years of trouble free service.
4.1 FLUIDS AND LUBRICANTS
Fuel and Engine Oil:
Refer to the engine’s operator manual for
specific information.
- Fuel tank capacity is 57 Litres (15 US Gal.)
Grease:
Use an SAE multipurpose high temperature
grease with extreme pressure (EP) performance.
Also acceptable, SAE multipurpose lithium
based grease.