CONVEY-ALL 1635-FL, Руководство оператора

Страница: 33 / 60

08.2020 3-13
Operator’s Manual: 1600-FL Series Conveyor
Convey-All™ Field Load conveyors are designed
to be easily and conveniently moved from place
to place.
1. Ensure the conveyor is ready for transport:
- It is in its fully collapsed position.
- Hitch is attached using anchor pin, retainer
and safety chain.
2. Be sure all bystanders are clear of the
machine.
3. Hitch conveyor to the tow vehicle and safety
chains are secured.
4. Raise the Jack, remove and store it.
5. Remove chocks from around conveyor
wheels.
6. Ensure the SMV (Slow Moving Vehicle)
emblem, all lights and reflectors required by
local highway and transport authorities are
in place.
They must be clean and clearly visible by all
overtaking and oncoming traffic.
7. Do not allow riders on the conveyor.
8. Slowly pull away from the working area.
- Be sure everything is connected and
nothing is hanging.
9. Keep to the right and yield the right-of-way
to allow faster traffic to pass. Drive on the
road shoulder, if permitted by law.
10. Never travel across slopes of more than 20°.
It is better to go straight up and down.
11. It is not recommended that the machine be
transported faster than 80km/h (50mph).
Fig 29 - Hitch attached to tow vehicle
12. During periods of limited visibility, use pilot
vehicles or add extra lights to the machine.
13. Always use hazard flashers on the tow
vehicle when transporting unless prohibited
by law.
Fig 28 - Remove chocks
3.9 TRANSPORTATION