CONVEY-ALL 1635-FL, Руководство оператора

Страница: 24 / 60

3-4 08.2020
Operator’s Manual: 1600-FL Series Conveyor
3.2 COMPONENTS AND CONTROLS
Before starting to work, all operators must
familiarize themselves with the location and
function of the components and controls of their
specific unit.
Options and locations may change without
notice.
Refer to the motor/engine manufacturer’s
manual for more detailed information.
Have only a qualified electrician supply power.
All wiring should comply with the
ANSI/NFPA 70 electrical requirements.
Top-End Drive (Optional):
Electric or hydraulic power is available for top-
end (TED) drives.
• Various electric switch mount options are
available.
S-Drive (Optional):
The S-Drive is contained inside a drive box
which is mounted under the tube just up from
the hopper.
• Electric Motor (optional) and power switch
must be installed by a qualified electrician.
• Gas Engine (optional)
Engine controls may vary depending on
model. A fuel tank may also be installed on
the engine cradle.
IMPORTANT:
Always run at maximum engine speed,
Fig 12 - Top-End Drive (TED)
Fig 13 - Electric controls
Fig 14 - S-Drive with electric motor
Fig 15 - S-Drive with gas engine