CONVEY-ALL 1635-FL, Руководство оператора

Страница: 14 / 60

2-6 08.2020
Operator’s Manual: 1600-FL Series Conveyor
2.7 PLACEMENT SAFETY
• Stay away from overhead power lines
when operating or moving the conveyor.
Electrocution can occur without direct contact.
• Keep conveyor as low as possible.
• Chock conveyor wheels before operating.
• Position conveyor providing enough space for
trucks to load or unload.
• Operate conveyor on level ground, free of debris.
2.8 LOCK-OUT TAG-OUT SAFETY
• Establish a formal Lock-Out Tag-Out program
for your operation.
• Train all operators and service personnel
before allowing them to work around the area.
• Provide tags on the machine and a sign-up
sheet to record tag-out details.
2.9 PTO SAFETY
• Never use a PTO driveline without a rotating
shield in good working order.
• Ensure PTO shields turn freely on the driveline.
• PTO driveline must be securely attached at
both ends before operating.
• Keep body, hair, and clothing away from
rotating PTO driveline.
• Keep U-joint angles small and equal.
- Do not exceed recommended operating
length for PTO driveline.
• Before starting tractor, turn power to PTO to
the off position (where applicable).
2.10 ELECTRICAL SAFETY
• Have only a qualified electrician
supply power. All wiring should
comply with the ANSI/NFPA 70
electrical requirements.
• Make certain that the conveyor motor is
properly grounded at the power source.
• Ensure that all electrical switches are in the
OFF position before plugging the conveyor in.
• Turn machine OFF, shut down and lock out
power supply (safety lock-out devices are
available through your Convey-All dealer parts
department) and wait for all moving parts to
stop before assembling, servicing, adjusting,
maintaining or repairing.
• Disconnect power before resetting any motor.
• Replace any damaged electrical plugs, cords,
switches and components immediately.
• Do not work on the conveyor’s electrical
system unless the power cord is unplugged or
the power supply is locked out.
2.11 TIRE SAFETY
• Failure to follow procedure when mounting a
tire on a wheel or rim can produce an explosion
and may result in serious injury or death.
• Do not attempt to mount a tire unless you
have the proper equipment and experience to
do the job.
• Have a qualified tire dealer or repair service
perform required tire maintenance.
• When replacing worn tires, make sure they
meet the original tire specifications. Never
undersize.