Control Techniques SM-Encoder Output Plus, Руководство пользователя

Страница: 22 / 42

22
SM-Encoder Plus & SM-Encoder Output Plus User Guide
www.controltechniques.com Issue: 4
6.2 Single line descriptions
Parameter
Range(
Ú
) Default(
Ö
)
Type
OL CL OL VT SV
x.01 Solutions Module ID 0 to 599 104 RO Uni PT US
x.03 Speed feedback ±40,000.0 rpm RO Bi FI NC PT
x.04 Revolution counter 0 to 65,535 revolutions RO Uni FI NC PT
x.05 Position
0 to 65,535 (1/2
16
ths of a
revolution)
RO Uni FI NC PT
x.07
Marker position reset
disable
OFF (0) or On (1) OFF (0) RW Bit US
x.08 Marker flag OFF (0) or On (1) OFF (0) RW Bit NC
x.10
Equivalent lines per
revolution
0 to 50,000 4,096 RW Uni US
x.13* Encoder supply voltage
0: 5V
1: 8V
2: 15V
0 RW Uni US
x.15 Encoder type Ab (0), Fd (1), Fr (2) Ab (0) RW Uni US
x.16 Encoder termination 0 to 2 1 RW Bit US
x.19 Feedback filter 0 to 5 (0 to 16 ms) 0 RW Uni US
x.24* Encoder simulation source Pr 0.00 to Pr 21.51 0.00 RW Uni PT US
x.25*
Encoder simulation ratio
numerator
0.0000 to 3.0000 0.2500 RW Uni US
x.28* Encoder simulation mode
0: Ab
1: Fd
2: Fr
3: Ab with marker lock
4 to 7: Fd with marker lock
0 RW Uni US
x.29
Non-marker reset
revolution counter
0 to 65,535 revolutions RO Uni NC PT
x.30 Non-marker reset position
0 to 65,535 (1/2
16
ths of a
revolution)
RO Uni NC PT
x.32 Marker revolution counter 0 to 65,535 revolutions RO Uni NC PT
x.33 Marker position
0 to 65,535 (1/2
16
ths of a
revolution)
RO Uni NC PT
x.35 Freeze revolution counter 0 to 65,535 revolutions RO Uni NC PT
x.36 Freeze position
0 to 65,535 (1/2
16
ths of a
revolution)
RO Uni NC PT
x.39 Freeze flag OFF (0) or On (1) OFF (0) RW Bit NC
x.45
Position feedback
initialised
OFF (0) or On (1) RO Bit NC PT
x.49 Lock position feedback OFF (0) or On (1) RW Bit
x.50
Solutions Module error
status
0 to 255 RO Uni NC PT
RW Read / Write RO Read only Uni Unipolar Bi Bi-polar
Bit Bit parameter Txt Text string FI Filtered DE Destination
NC Not cloned RA Rating dependent PT Protected US User save
PS Power down save
*Pr x.13 , Pr x.24 , Pr x.25 and Pr x.28 are only used when operating with a SM-Encoder
Output Plus module. These parameters are not used when operating with a SM-Encoder
Plus module
NOTE