Control Techniques SM-Encoder Output Plus, Руководство пользователя

Страница: 2 / 42

General Information
The manufacturer accepts no liability for any consequences resulting from inappropriate, negligent
or incorrect installation or adjustment of the optional operating parameters of the equipment or from
mismatching the variable speed drive with the motor.
The contents of this guide are believed to be correct at the time of printing. In the interests of a
commitment to a policy of continuous development and improvement, the manufacturer reserves the
right to change the specification of the product or its performance, or the contents of this guide,
without notice.
All rights reserved. No parts of this guide may be reproduced or transmitted in any form or by any
means, electrical or mechanical including photocopying, recording or by an information storage or
retrieval system, without permission in writing from the publisher.
Drive software version
The SM-Encoder Plus and SM-Encoder Output Plus can only be used with the following drive
software versions:
If a SM-Encoder Output Plus module is fitted to a Unidrive SP with software version earlier than
V01.13.00, the module will operate as a SM-Encoder Plus module.
Copyright © July 2007 Control Techniques Drives Ltd
Issue Code: 4
SM-Encoder Plus SM-Encoder Output Plus
Unidrive SP
≥
V01.02.00
≥
V01.13.00
Digitax ST
≥
V01.00.00
≥
V01.00.00