Control Techniques SM-Encoder Output Plus, Руководство пользователя

Страница: 19 / 42

SM-Encoder Plus & SM-Encoder Output Plus User Guide
19
Issue: 4 www.controltechniques.com
How to
use this
gu
id
e
Sa
fe
ty
in
fo
rm
a
tio
n
In
tr
o
du
cti
on
In
st
al
ling t
he
Sol
u
tions Mo
dule
G
e
tt
in
g
s
tar
te
d
P
a
rame
ter
s
Dia
gnost
ics
Te
rmi
nal dat
a
Index
5.3 Simulated encoder output set-up
SM-Encoder Output Plus only
The following parameter set-up should be followed to obtain a simulated encoder
output.
5.4 Freeze function
The SM-Encoder Plus and SM-Encoder Output Plus have a freeze function, but do not
have freeze inputs. The freeze function can be activated using either the SM-
Applications or SM-Universal Encoder Plus. When a freeze signal is applied, the freeze
flag (Pr
x.39 ) is set to "ON". When activated, the non-marker position data (Pr x.29 and
Pr x.30 ) is transferred into Pr x.35 and Pr x.36 .
The freeze flag does not reset itself. Before carrying out consecutive freeze functions,
the SM-Encoder Plus or SM-Encoder Output Plus freeze flag must be cleared by the
user (Pr
x.39 = "OFF").
5.5 Termination resistors
By default the termination resistors on the encoder inputs are enabled with the
exception of the marker pulse inputs which are disabled. The termination resistors can
be can be configured as shown below using encoder termination Pr
x.16 .
The termination resistance when connected (A, A\) = 120
Ω
total.
Function Detail
Simulation
source
• Set the source of the simulated encoder output in Pr x.24.
x.05 : The encoder input on the Solutions Module
3.29 : The encoder input on the drive
Simulation
ratio
• Set the required ratio between the source and output lines per revolution in
Pr
x.25.
1.0000 : ratio of 1
0.5000 : ratio of 1/2
0.2500 : ratio of 1/4
0.1250 : ratio of 1/8
0.0625 : ratio of 1/16
0.0312 : ratio of 1/32
Simulation
output mode
• Set the required encoder simulation mode in Pr x.28 .
0 : Ab – Quadrature outputs
1 : Fd – Frequency and direction outputs
2 : Fr – Forward and reverse outputs
3 : Ab.L – Quadrature outputs with marker lock
4 : Fd.L – Frequency and direction outputs with marker lock
If a SM-Universal Encoder Plus is used as a freeze input, it must be set to freeze the
drive position by setting Pr
x.40 to “On”. Also, before consecutive freeze operations can
be performed in the SM-Encoder Plus or SM-Encoder Output Plus, the SM-Universal
Encoder Plus freeze flag (Pr
x.39 ) must be cleared together with the SM-Encoder Plus
or SM-Encoder Output Plus freeze flag (Pr x.39 ).
E.g. If slot 3 has a SM-Universal Encoder Plus fitted and slot 2 has an SM-Encoder Plus
fitted, Pr
16.39 and Pr 17.39 need to be set to “OFF” before another freeze function can
be performed on the SM-Encoder Plus or SM-Encoder Output Plus.
NOTE
Terminal Encoder Input Pr x.16=0 Pr x.16=1 Pr x.16=2
1, 2 A, A\ Disabled Enabled Enabled
3, 4 B, B\ Disabled Enabled Enabled
5, 6 Z, Z\ Disabled Disabled Enabled