Control 4 C4-KNX-BW180 Series, Руководство пользователя

Страница: 35 / 53

Description of application and parameters
Application program
35
NOTE
This parameter is only visible if the "Used brightness" parameter is set on
"external" or "internal or external".
Options: 1 .. 500 .. 1000
– The brightness-value threshold is used to specify the lux value at which the detector is to
start to respond. If the detector does not switch on and the measured brightness lies above
the set threshold, no telegram is sent during movement. The threshold applies only to the
external brightness.
Options: No
Yes
–
No : There is no separate external push-button object.
–
Yes : A 1-bit external push-button communication object (input) is being enabled. Via this
object it is possible to manually change the (output) status of the detector with the aid of a 1-
bit telegram. It is used especially in the "Automatic switch-on" mode for switching off and in
"Automatic switch-off" mode for switching on.
NOTE
This parameter is only visible if the "Use of external push-button" parameter is
set on "Yes".
Options: On telegram
Off telegram
–
On telegram : The detector is activated with a 1 telegram and deactivated with a 0 telegram.
–
Off telegram : The detector is activated with a 0 telegram and deactivated with a 1 telegram.