Control 4 C4-KNX-BW180 Series, Руководство пользователя

Страница: 25 / 53

Description of application and parameters
Application program
25
Options: 00:00:10 ... 00:00:30 ... 18:12:15
– Here the time which lies between the sending of two telegrams (no change in value) is set.
Options: Off
On
–
Off : If movement is no longer detected and the switch-off delay has expired, value 0 is sent
via the bus.
–
On : If movement is no longer detected and the switch-off delay has expired, value 1 is sent
via the bus.
Options: No
Yes
–
No : The set value is sent only once via the bus.
–
Yes : The set value is sent cyclic via the bus.
– Parameter "cyclic repeat time" is also displayed.
Options: 00:00:10 ... 00:00:30 ... 18:12:15
– Here the time which lies between the sending of two telegrams is set.
Options: 00:00:10 .. 00:05:00 .. 18:12:15
– The switch-off delay is the time period between the last movement detected and the sending
of the telegram "Value for switch-off". If movement is detected again within this period, the
switch-off delay timer is started again.