Control 4 C4-KNX-BW180 Series, Руководство пользователя

Страница: 32 / 53

Description of application and parameters
Application program
32
Options: Yes
No
–
Yes : When the application is reloaded into the detector, the values changed via the bus are
overwritten with the parameterized values of the ETS application.
–
No : When the application is reloaded into the detector, the values changed via the bus are
not overwritten with the parameterized values of the ETS application.
Values:
■
Switch-off delays
■ External/internal brightness threshold
■ Brightness correction (daylight), see "Brightness detection" application, page 40.
Options: No
Yes
–
No : There is no separate object for detection independent of brightness.
–
Yes : A 1-bit communication object for brightness-independent detection (input) is being
enabled. This object allows the detector to be switched independent of brightness.
NOTE
This parameter is only visible if the "Use of object for detection independent of
brightness" parameter is set on "Yes".
Options: On telegram
Off telegram
–
On telegram : Detection independent of brightness is activated with a 1 telegram and
deactivated with a 0 telegram.
–
Off telegram : Detection independent of brightness is activated with a 0 telegram and
deactivated with a 1 telegram.