Continental Access CADV-H-XD16, Руководство пользователя

Страница: 71 / 131

User’s Manual
58
You can adjust the minimum number of detection blocks that must be activated to trigger a
motion alarm. Highlighting the box under the
Min. Blocks heading and pressing the button
allow you to adjust the minimum number of detection blocks for Daytime and Nighttime
independently. Smaller numbers provide greater sensitivity because fewer detection blocks
must be activated.
Figure 80 — Motion Detection Min. Blocks screen.
Turning
Zone View On will allow you to observe how the DVR is reacting to motion. When in
the motion viewing mode, the detection zone of video will be displayed. Any detected motion
within the zone will be displayed in red.
You can define the area of the image where you want to detect motion; e.g., a doorway.
Highlight the box under the
Zone
heading, and press the button. The
Motion Detection
Zone screen displays.
Figure 81 — Motion Detection Zone screen.
The
Motion Detection Zone
screen is laid over the video for the selected camera. You can set
up motion detection zones by selecting or clearing blocks.
NOTE: You can set up motion zones one block at a time in groups of 8 or 16 individual
block groups (8- and 16-channel DVR respectively). A block group is positioned within
the image area using the Up and Down arrow buttons, and individual blocks within the
block groups are selected or cleared using the camera buttons.