Continental Access CADV-H-XD16, Руководство пользователя

Страница: 60 / 131

Digital Video Recorder
47
NOTE: Any cameras that are Off, have lost video or are set to Covert (unless the user
has authority to view covert cameras) will be excluded from the Cameo sequence.
You can define the screen layout in a variety of formats and set the DVR to sequence through
the different screen layouts (pages) so that all the cameras will be displayed. You can also set
up the DVR to display one camera or a group of cameras all the time while cycling through the
remaining cameras in a “cameo” window. This can be done with one camera displayed full
screen while displaying the cameo window as a PIP (picture in picture), or displaying the
cameras in a grid pattern with the bottom right window as the cameo.
NOTE: Sequence cannot be used in the 4x4 display mode of the 16-channel, and 3x3
mode of the 8-channel DVR.
You can adjust the display dwell time by highlighting the box beside Interval and pressing the
button. You can select dwell intervals ranging from 1 second to 1 minute.
Highlight
Event Monitoring On and press the button. Pressing the button toggles
between
On
and
Off
. When it is
On
, the DVR will display the camera associated with the event
when an event occurs.
Highlight the
Spot Monitor tab to switch to the Spot Monitor screen.
Figure 65 — Spot Monitor screen.
You can define which cameras display sequentially on the Spot Monitors. Highlight the box in
the
Channels column for the desired Spot Monitor and press the button.
You can save your Display settings by highlighting
Save
and pressing the button. Selecting
Cancel exits the screen without saving the changes.