EasyScopeIII for DS60M10 User Guide
Version 1.3
Document Reference No.: CP_000037 Clearance No.: CP#027
Copyright © Connective Peripherals Pte Ltd
52
Alerts:
The alerts tab is shown below.
This can be used to configure up to four alerts to flag when the logged data reaches a critical
value. Alert types are pop-up windows, email or both. A valid e-mail address and network
connection are required for the e-mail alerts.
o
Alert Number
Number of alert from 1 to 4
o
Ch
Alert is configured for this channel
o
Type of Alert
Type can be Off, Email, Popup or Both. If the type of alert is Off, All the alert
controls are disabled except for the Alert Number.
o
Greater/Less than
Condition to check
o
Value
The value to check, the value is in millivolts
Data Display:
The Data Display tab is shown below.
This controls whether the logged data will be displayed in the plot area as it is captured or not.
Selecting Non-realtime Display allows faster logging since the overhead of plotting the data
points on the plot area is eliminated. When data logging is stopped, the data points will be drawn
in the plot area based on the current x-axis scale.
