EasyScopeIII for DS60M10 User Guide
Version 1.3
Document Reference No.: CP_000037 Clearance No.: CP#027
Copyright © Connective Peripherals Pte Ltd
39
Normally, sample data points are plotted the moment it is captured. It can be seen that sample data
curve is drawn gradually based on the sample interval. But if the sample interval is 10ms and below, the
data points are plotted collectively. Data logger waits for a certain number of samples to be accumulated
before it will display. The number of samples will be based on the current X-scale range e.g. X minimum
is 0 and X maximum is 1000, thus data logger will accumulate 1000 samples before it will draw the data
curve.
Data logger has a minimum range value to consider - 10 samples. If the current X-scale range is less
than the mentioned value, data logger will automatically change the X scale to make it 10 samples.
There are 2 sample rate units to choose from, namely s (seconds) and ms (milliseconds). Changing the
unit will automatically convert the sample interval value.
4.3.4
Channel Enable buttons
The channel enable buttons can be used to enable or disable a logging channel. When enabled, the
channel enable buttons have the same colour as the channel trace.
Otherwise, they are greyed out.
These buttons are disabled when data logger is in running mode.
