EasyScopeIII for DS60M10 User Guide
Version 1.3
Document Reference No.: CP_000037 Clearance No.: CP#027
Copyright © Connective Peripherals Pte Ltd
14
An alternative to the Run / Stop button is provided through the File Menu at the top of the application
screen. Click on "File" to select the drop down menu as shown in the figure below.
Click on "Run" or "Stop" as desired. Clicking on "Exit" will quit the EasyScope application.
3.3.2
Time Base Settings
The time base settings are adjusted by clicking on the rotary switch in the Time base Panel. There are 20
possible settings ranging from 200 ms/division to 100 ns/division.
The knob can be rotated by the left mouse button (click and drag) or the arrow buttons on the keyboard.
Figure 15- Time based settings
Please note, at the lower speed settings there will be a noticeable delay between clicking on the "Run"
button and the trace appearing on the oscilloscope screen. This is because the sampling (conversion) rate
is low and it takes more time to capture a buffers worth of data.
The time base setting changes the sampling rate of the oscilloscope. The sampling rate is displayed below
the plot window.
The time base setting value is also updated below the plot window as shown in the box below.
