Conergy TS, Инструкция для владельца и по установке

Страница: 13 / 36

E
N
G
L
IS
H
Conergy TS
Owner & Installation Manual
5.3
5.4
For optimum performance the solar collectors need to face the equator (in Southern hemisphere
this is north and in the Northern hemisphere this is South). Installation on angles of up to 45°
away from the equator do not have a major effect on the annual solar output, consequently roof
locations which face less than 45° away from the equator are acceptable. If the collectors are
installed with an east facing bias the best solar input is achieved in the morning and if there is a
west facing bias the best solar input is in the afternoon.
Careful site inspection is required to ensure the selected location is not subjected to shading
from adjacent trees or buildings throughout the day, but particularly between 9am and 3pm, the
highest solar input times. Shadows are longer in winter than in summer so a site that is free of
shadows from adjacent objects in summer may have some shadows in winter.
The solar water heater should be located as close as possible to the location which uses the most
hot water eg. bathroom or kitchen. This is to reduce energy losses which may occur if the pipe
work between the solar water heater and the point of usage is too long.
To achieve optimum performance the solar water heater should be installed on a roof pitch of
greater than 8° and less than 30°. Installations on a roof where the roof pitch is greater than 30°
will require additional support at the storage tank to prevent it moving downward during and after
installation. If the roof pitch is less than 8° the system will require a mounting frame to increase
the pitch above 8°. Installations below 8° do not thermosiphon effectively and the collector glass
will not self clean during rainy periods.
Connection and mounting part kits
The table below indicates the connection and mounting kits required for each model system:
Roof location selection
There are five major factors to consider when selecting the solar water heater installation location:
|
|
|
|
Module Number Parts Kit
TS180/2/O/E24/V/E20BC PK-2100
TS180/2/O/E24/V/E20SB
TS180/2/C/E24/V/E20BC
PK-2101
TS180/2/C/E24/V/E20SB
TS180/2/O/E24/V/F20LC
PK-2100
TS300/4/O/E24/V/E20BC PK-2102
TS300/4/O/E24/V/E20SB
TS300/4/C/E24/V/E20BC
PK-2103
TS300/4/C/E24/V/E20SB
TS300/4/O/E24/V/F20LC PK-2102
Installation Instructions