Conergy TS, Инструкция для владельца и по установке

Страница: 7 / 36

E
N
G
L
IS
H
Conergy TS
Owner & Installation Manual
Installation Information
Conergy TS model number explained
Important safety information
| All water heaters have the ability to produce hot water very quickly. To reduce the risk of scald
injury it is recommended that a temperature control valve be fitted to the hot water supply pipe
work. This valve should be checked every 6 months to ensure its operation and settings remain
correct. Please check that the pressure & temperature relief valve relief pipe is not located
where it can cause damage if hot water is discharged.
| This water heater is not intended for use by young children, infirm persons, or persons lacking
relevant skill or experience, without suitable supervision. Children should be supervised to
ensure they do not play with hot water taps or the water heater.
| For closed circuit systems, if the water seems red in appearance it could mean that there is
a leakage of glycol from the jacket into the main water tank. Please contact your authorised
Conergy dealer or installation service provider as soon as possible.
Installation Information
2.1
2.2
XX NNN / N / X / XNN / X / XNNXX
System Type - Nominal Volume - Collector Area - Tank Type - Booster - Tank Material - Collector Type
Variable Categories
System Type AS Active Systems (pumped)
HP Heat Pump System Type
TS Thermosiphon, TS
Nominal Volume Nominal Storage Volume
Collector Area 2, 2.5, 4, 5, 6 Nominal Collector Area
Tank Type O Open Circuit
C Closed Circuit
Booster E Electric
G Gas
XX Booster Rating (kWx10 or Lpm)
Tank Material /
Designation V Vitreous Enamel
S Stainless Steel
M Millenium Tank
Collector Type E20SB, E20BC, E25BC or F20LC