Conergy TS, Инструкция для владельца и по установке

Страница: 5 / 36

E
N
G
L
IS
H
Conergy TS
Owner & Installation Manual
Customer Information
Storage Tank & Solar Collectors
The potable water storage tank is used to store the heated water ready for household use. It is
constructed using high quality vitreous enamel lined low carbon steel to provide long life. The
tank is insulated with a high density polyurethane material to ensure minimal heat losses and
maximmum structural strength.
The solar collectors contain a multi tube copper water way system bonded to a solar absorber
plate, the combination of which collects solar energy and transfers it to the fluid within the collector
circuit. The absorber plate system is enclosed in an insulated metal casing covered with a high
strength toughened glass sheet that protects the absorber system from physical damage.
Ancillary Energy Support (AES) - Booster System
Electricity and gas are the two options for the AES system. An electric Ancillary Energy Support
(AES) system uses an electric element to heat part of the stored household water on those
occasions when there is reduced solar energy available e.g. cloudy days.
The electricity supply to the electric AES, located within the storage tank, is automatically
controlled by an internal thermostat. This thermostat will only allow the electric element to operate
if the storage tank water temperature falls below 60
o
C. It will only consume electricity until the
water temperature is increased to 60
o
C. At this stage, it will turn off automatically.
1.3.1
1.3.2
Conergy TS 300 litre vitreous enamel tank LC collector