Operating Instructions
LASSTEC
Weighing System 0521
BAL0521-0001-EN
www.conductix.com
translated document
page 20 of 123
5.3.4
Communication Parameters
In the “
Communication Parameters
” window, you can define the settings for the communication between the software and the
interrogator.
①
Computer Used Com port
:
Shows the selected serial port of your computer which will be used by the software for communicating with the interrogator. All
available ports are listed here. You have to define the port via which the communication to the interrogator is going to be
established and to which the interrogator is connected. If no serial ports are listed here, exit the software and check the installation
of the NVISA driver.
②
Baud Rate [Bit/s]
:
This shows the speed at which information is exchanged between this software and the connected interrogator. When using the
RS-232 protocol (
④
) for communication the baud rate is automatically set at 9600 [Bit/s]
