Operating Instructions
LASSTEC
Weighing System 0521
BAL0521-0001-EN
www.conductix.com
translated document
page 105 of 123
6.2.8.1
Set the date and time
When the set date and time button is pressed on the user configuration page, the following page will appear:
Set the date and time:
The way to set the date and time of the HMI is to enter the Year/ Month/ Day and Hour: Minute: Second separately, then confirm by click
on SET button.
Year: selection of the digit to be configured and increment 1 by 1. Minimum: 2014; Maximum 9999
Month: increment the number 1 by 1. Minimum 1; Maximum 12.
Day: increment the number 1 by 1. Minimum 1; Maximum 31.
Hour: increment the number 1 by 1. Minimum 0; Maximum 23.
Minute: increment the number 1 by 1. Minimum 0; Maximum 59.
Second: increment the number 1 by 1. Minimum 0; Maximum 59.
To enter the date and time (see chapter 6.3.2).
Navigation:
Button
Action
3_1
Confirm and set the HMI date and time
3_2
Confirm and set the Interrogator and HMI date and time. This button is disable when the system is locked.
3_4
Exit the current page and go on configuration page
