Condair Nortec EL-Series, Руководство по эксплуатации и обслуживанию

Страница: 23 / 96

23 Operator Interface Nortec EL
2582954_D_EN_1811_Nortec-EL_OM
Features Tab
– Manual Capacity A: shows the set capacity limitation
value as a percentage of the maximum capacity of steam
cylinder A. Select the field to adjust the value. Refer to
"Manual Capacity Tab" on page 29 for more details.
– Manual Capacity B: shows the set capacity limitation
value as a percentage of the maximum capacity of steam
cylinder B. Select the field to adjust the value.
Note: This field appears only on units with dual steam
cylinders.
– Low Conductivity: shows the status of the low conductiv -
ity function. Select the field to enable or disable the func -
tion. Refer to Low Conductivity for more details.
–
Idle Mode:
shows the idle function that is active when the
humidifier is in standby mode. Select the field to choose a
different function – "Idle Only", "Idle Drain", "Keep Warm",
or "Partial Drain". Refer to
Idle Mode
for more details.
– Forced Drain: shows the status of the forced drain func -
tion. Select the field to enable or disable the function.
Refer to Forced Drain for more details.
– Forced Drain Interval: shows the number of run hours
after which the forced drain function is triggered. Select
the field to change the time interval. Refer to Forced Drain
Interval for more details.
–
Short Cycle:
shows the status of the short cycle function.
Select the field to enable or disable the function. Refer to
Short Cycle for more details.