15
4.1.3.3 Selecting the modulation mode
Select “
Mod Mode
” in the control settings menu, then press the
<Set>
key.
In the upcoming modification dialogue select the desired modulation mode.
Factory setting:
Single
Options:
Single
(control with a single control signal (Y))
Dual
(control with a control signal (Y) and a limit signal (Z))
4.1.3.4 Selecting the unit type
Select “
Unit Type
” in the control settings menu, then press the
<Set>
key.
In the upcoming modification dialogue select the desired unit type.
Factory setting:
Stand Alone
Options:
Stand Alone
(operation as stand alone unit)
Main
(operation as Master unit in a multi-unit system)
Extension
(operation as extension unit in a multi-unit system)
4.1.3.5 Selecting the control signal
Note: This setting is available only if the internal P or PI controller or external (continuous) controller
is activated (see chapter 4.1..).
Select “
Controlsign.
” in the control settings menu, then press the
<Set>
key.
In the upcoming modification dialogue select the desired control signal.
Factory setting:
0–10V
Options:
0–5V
,
1–5V
,
0–10V
,
2–10V
,
0–16V
,
3.2–16V
,
0–20mA
,
4–20mA
Esc
Set
Modulation Mode
Single
Dual
Single
Controls
Mod Mode :Single
Unit Type :Set
Controlsign.:0-10V
Reg Mode :External
Limitsignal :0-10V
Short CD :Off
Esc
Set
Esc
Set
Unit Type
Stand Alone
Main
Extension
Stand Alone
Controls
Mod Mode :Single
Unit Type :Set
Controlsign.:0-10V
Reg Mode :External
Short CD :Off
Time Prop. :Off
Esc
Set
Esc
Set
Control Signal
0-5V
1-5V
0-10V
0-10V
2-10V
0-16V
Controls
Reg Mode :External
Mod Mode :Single
Unit Type :Set
Source :Analog
Controlsign.:0-10V
Short CD :Off
Esc
Set
Settings
Controls :Set
Power Limit :100
Water Mngm. :Set
Language :English
Remote Test :Set
Date :01.10.08
Esc
Set
Settings
Controls :Set
Power Limit :100
Water Mngm. :Set
Language :English
Remote Test :Set
Date :01.10.08
Esc
Set
Settings
Controls :Set
Power Limit :100
Water Mngm. :Set
Language :English
Remote Test :Set
Date :01.10.08
Esc
Set
